In September 2023, HULAMIN awarded the contract for the widening of their S5 aluminium cold rolling mill to A Richards Consulting Ltd (ARC). This followed one of several engineering studies carried out by ARC and resulted in the S5 widening project being awarded against a tight deadline to complete Phase 1 by December 2023 ready for board approval. This was immediately followed by Phase 2 which will see the widening project designed, manufactured and implemented by the second quarter of 2025. Project key features: Increase maximum strip width capability of the mill to 1875 mm Higher material temperature capability from faster, back-to-back rolling Improved strip quality including: New flatness sensor incorporating load cells New strip scanner heads New spray system New enhanced ARC strip dryness system An upgraded optical centre guide system A new, ARC designed compact 3-roll entry bridle with colouring roll A new oil-air lubrication system for the mill Upgraded spool handling to cater for dual spool lengths Wider Strip Processing Increasing the maximum strip width will open new markets to HULAMIN and allow the S5 mill to focus on processing wider, 14-out high quality can stock material. In addition, this will enable better distribution of product across all areas of the plant thereby increasing the overall plant utilisation. The main component of this upgrade being a new entry bridle with colouring roll designed and supplied by ARC, which not only allows the wider material to be processed but also includes features to ensure accurate roll positioning, stable tension control and ease of maintenance. Also included are new, longer work rolls and back up rolls with new bearing arrangements and the associated chock modifications to accommodate the increased width and higher operating temperatures. The ARC design caters for increased strip temperatures and speeds but also meets the challenges of accommodating the new surface inspection cameras, strip scanners, strip dryness equipment and flatness measurement system in an already congested area of the mill. Mill Upgrades Upgrading a rolling mill is often necessary when introducing a new product and provides an alternative to investing in completely new equipment. Upgrading is also a cost effective solution to updating old or obsolete technology and can also minimize the loss of production associated with replacing equipment with new. However, this is a very specific area of expertise and one which requires the highest level of know-how. Such is the case with the HULAMIN upgrade, where ARC has designed the new and upgraded equipment and planned the implementation to minimize the loss of production and disruption to the plant. The ARC team has many years of experience in modernisations and upgrades of rolling mills and processing equipment for the steel, aluminium and other non-ferrous industries. Working closely with HULAMIN over the past year or so, ARC has been able to provide insight into the process aspects of this upgrade and the analysis and evaluation of different solutions. ARC also provided CAPEX estimates for the design, supply and implementation and now the full design, supply and supervision of installation & commissioning of the new upgraded S5 cold mill. Aluminium Supplier to Africa and the World HULAMIN is not only the largest aluminium rolling operation in Sub-Saharan Africa, but is one of the largest exporters, which represents more than 60% of sales. Aluminium semi-fabrication in the form of plate, sheet & foil is supplied to customers across South Africa, Africa and the world focusing on specific product and end-use markets such as automotive, packaging, transportation, building and electrical applications. www.hulamin.com A Richards Consulting Ltd (ARC) is a specialist consulting and engineering group with it’s registered office in London. ARC operates from Dorset with a highly experienced team of experts dedicated to the rolling mill industry. This experience is based on many years gained working with companies such as Davy McKee, VAI, SMS Parkegate, FATA Hunter, HATCH etc. Specialising in upgrades and modernisations, the ARC team understands the critical and complex nature of this business and is ideally placed for providing an efficient, flexible and proactive service to support clients. ARC services range from feasibility studies, due diligence and asset integrity reports, through to full engineering design, project management and supply services.
We are delighted to announce that we recently signed an agreement to represent United States Controls (USC) in Europe, including sales of equipment and after sales service and support including spares and repairs for the steel and aluminium rolling industries. With more than 250 installations worldwide, United States Controls is a leader in the design and manufacture of selective spray bar cooling systems for rolling mills. Unlike other spray bar manufacturers, USC’s innovative modular design and self-cleaning valve technology offer mill operators improved performance and reliability making them the preferred choice for both new and retrofit installations around the world. A Richards Consulting (ARC) is an independent consulting and engineering group, providing engineering support through a small group of associates who are expert rolling mill and process line design engineers who have also gained many years of experience in the manufacturing, capital equipment industry, particularly in the metals and mining world. Our representation of USC in Europe means that we can combine the supply and support of a world leading spray control system for aluminium & steel rolling mills, with a complete engineering support package, particularly comforting for our clients wishing to retrofit the USC spray system to an existing mill to improve performance. ARC is also able to engineer extensive mill improvement upgrades from strip dryness to enhanced strip inspection systems, mill modifications to enable wider strip or larger coils to be processed and also has in house mill modelling capability for scheduling of new products. Sales of USC equipment will be led by Trevor Card on behalf of ARC. Trevor has 30+ years experience in supplying this type of equipment in the aluminium and steel industries and is highly experienced in mill controls in general. For more information contact Trevor Card on +44 7555 137620 or e-mail trevor.card@usc-arc.co.uk or alan.richards@usc-arc.co.uk Websites: www.usc-arc.co.uk www.unitedstatescontrols.com www.arichards.co.uk
A Richards Consulting Ltd is proud to be supporting Bridgnorth Aluminium with design and detail engineering for technology upgrades. Having manufactured aluminium strip since 1933, Bridgnorth Aluminium Ltd has firmly established itself as a trusted supplier of rolled aluminium products with knowledge and experience spanning many decades, evident in the work they do today. A Richards Consulting Ltd (ARC) includes a team of engineers with many years' experience in the aluminium and steel industries, providing engineering services, general technical consulting, due diligence services, asset integrity reports, process optimisation, capacity plaing and general business advice, particularly in the metals, industrial and manufacturing sectors.
Having spent 30 or so years (yes, hard to believe I know), working mainly in the corporate world for large capital equipment and plant builders in the metals and mining industry, and also having been made redundant 3 times in the last 4 years, twice just 12 months apart and once threatened with legal action just for trying to find a job for myself and a dozen colleagues, I decided enough was enough. Yes, I've enjoyed my time in the corporate world I suppose, especially during the periods where I've been lucky enough to live and work overseas and meet the most wonderful people along the way, but in my 'late fifties' it's time to rethink my objectives and redirect my energy into something slightly more varied and rewarding! Maybe it's just a symptom of growing older, maybe it's just me, but it doesn't get any easier does it? Having said that, I always need a challenge or a project and I'm certainly not one to shy away from hard work and putting in the hours, but it is really important for me to love what I do and get that sense of satisfaction whilst achieving tangible results, which is what I've been lacking in recent years. I understand there's not the job security there was in decades past, and also the competition has increased, but 'taking back control' is the way to go apparently! Anyway, spurred on by the annual redundancy and the dread of having to rely on the unpredictable world of metals engineering, I decided to join ibd Business Advice Group as a self employed but accredited business consultant, pick up some new skills through their extensive training courses, and put my energy into helping others starting out on their long road to retirement. Hopefully I can use the diverse and extensive knowledge and leadership, sales, management, manufacturing and project development experience I've gained living and working in countries such as India, South Africa, France, Italy, Russia, Korea and China and of course the UK. I will keep you updated on my progress through what I expect (and hope) to be a challenging but rewarding existence, at least in job satisfaction and work-life balance!
